Congratulation for this first main step - Box One empty and first part finished !!!!
Great
Congratulation for this first main step - Box One empty and first part finished !!!!
Hi sisco, good work so far but more tricky tasks ahead. The inside hull planking requires a lot of thinking and honestly I’m awaiting @Uwek next posts.Very good progress my friend
Your preparation and bending of the clamps was successful, like we can see
I have one remark to the installation of the clamp at the bow.
Did you use the measuring sticks for defining the height?
On my "version" of the model the top of the clamp is also at the top of the step in the keel (red arrow)
Yours is some milimeter lower. (green arrow)
View attachment 192999
I did not fix mine until now, so it would be good, if you could check it on yours...
Do you mean this one?Hi sisco, good work so far but more tricky tasks ahead. The inside hull planking requires a lot of thinking and honestly I’m awaiting @Uwek next posts.
I did notice the same issue Uwe pointed out. I think the deck clamps should sit flush with the step in the keel. There is a clear drawing in the second manual indicating this. I don’t have the manual at hand but I’m sure you’ll find it.
That’s the one !Do you mean this one?
View attachment 193000
Nothing that can’t be undone sisco. I need to adjust the angle of my top transom too.thank you all for your help.
I was probably wrong.
I used the sticks
For once I picked up the gauge to check the drawing .. I was uncertain for a long time .. and in the end I chose the wrong option.
Patience .. As soon as possible I will remedy the errors.
Now I'm not in great physical shape and if it weren't for Covid I already had it in March .. I would think I have it.